7020123

Rhosonics Slurry Density Meter Eco (SDM ECO)

Overview

Rhosonics Slurry Density Meter Eco, An instrument that allows for measuring the density of slurries in real-time. "Price on Request"

Please fill out the RFQ Form and send it to our sales team.

$0.00 Price including GST: $0.00
In stock

Qty Available: 1

If out of Stock, Typical Lead Time: 7-8 Weeks

Rhosonics has launched the 3rd generation of the Slurry Density Meter, the SDM ECO. The SDM ECO incorporates over 1,000 installations and almost 20 years of on-site experience.

Please fill out the RFQ Form and send it to our sales team.

Features and Benefits

Reliability: The SDM ECO uses ultrasonics, a trusted and field-proven technology to measure the slurry density, even under the highest density levels and with abrasive conditions.

Eco-friendliness: No radioactive materials, resulting in lower cost of ownership, reducing resources and time spent on nuclear safety compliance.

Adaptability: The modular design and a range of fittings make the instrument applicable for various installations, in horizontal or vertical pipes, half-filled pipes, launders, or tanks.

Ease-of-use: Instrument control is done through a standard 7’’ touchscreen display, laptop, via optional Wi-Fi, or from anywhere when access is given to the server.

Measuring method

The SDM ECO uses the acoustic impedance to calculate the slurry density. This parameter refers to the reflection of ultrasonic energy that occurs at the interface between the sensor and a slurry or liquid.

Installation
Each process integration system features a fitting equipped with a receiving flange. Installing the SDM ECO involves sliding the sensor into the fitting, followed by mounting the mounting flange onto the receiving flange of the fitting.

Please feel free to discuss with us about your product requirement. Instrowest can help you with product Supply, Installation and Calibration.

Sensor
Method: Ultrasonics
Process pressure: 1 to 16 bar @ 110 C | 40 bar @ 20 C (Contact us for detailed information)
Process temp. Range: 0 C to +150 C (32 F to 302 F)
Rod material: SS316L
Wet-parts (sensor tip): Ceramics, Duplex 2205
Sensor surface: radius 0 mm (flat)
Dimensions: Ø 27 mm x 146 mm length

Transmitter
Power supply: Via power over Ethernet POE
Cable glands: 1x M20x1.5, 1x M25x1.5 split cable gland for ethernet
Ambient temperature: -5 C to +50 C (23 F to 122 F)
Humidity: < 95% at 40 C (noncondensing)
Protection rating: IP68, NEMA 6P
Weight: Approx. 1.5 kg
Materials: Coated Aluminum housing
Dimensions: 212 x 170 x 218 (L x W x H in mm) / 212 x 170 x 348 including sensor

HMI
Power supply: 18...32 VDC, (~17W to 20W-peak)
Analog Output: 2x 4-20 mA
Digital Output: 1x Modbus RS485, 1x ethernet
Data logging: Continuous, retrievable via USB stick
Data logging storage capacity: 6 GB
Cable glands: 3x M20x1.5, 1x M25x1.5 split cable gland for ethernet
Ambient temperature: -5 C to +50 C (23 F to 122 F)
Humidity: < 95% at 40 C (noncondensing)
Protection rating: IP65, NEMA 4
Display: 7” touchscreen
Operation: 6 Push buttons
Materials: Stainless Steel 316 housing
Weight: Approx. 3 kg
Dimensions: 300 x 300 x 150 (L x W x H in mm)