Accessories

$437.54
A plug-in alarm module for SIPART PS2 Positioner with 3 alarm outputs and 1 binary input.
$1,228.25
Linear Potentiometer to suit remote position feedback on linear (rising stem) valves.
$525.00
This Moore industries signal isolator is a highly cost-effective means of protecting process signals from distortions associated with ground loops,...
$236.94
XAL4060 Interface Bracket
$23.19
SMC 8100 Feedback Arm ass - SX Thread M6x1
$34.68
SMC 8100 Feedback Arm ass- MX Thread M6x1
$2.00
10-32UNF x 3/8 button head socket screws. SS304. To suit bray actuators.
$748.44
A NCS Sensor for SIPART PS2 Positioner for the non-contacting detection position feedback of part-turn actuators only.
$551.88
Internal NCS module for SIPART PS2 for contactless position measurement, for installation in the positioner enclosure without explosion protection.
$0.00
EMC Filter Module for SIPART PS2 for connecting an external potentiometer.
$579.29
A plug-in Position Feedback Module for SIPART PS2 Positioner for a 4-20mA position feedback signal.
$536.76
A retrofit mechanical limit switch module for SIPART PS2 Positioner.
$127.97
This bracket kit is for mounting a SMC 8100 Rotary Type Pneumatic Positioner to a F79U Actuator.
$123.80
SIPART PS2 Console for NAMUR Mounting Kit with rotary actuators 80 X 30 X 30 MM.
$148.37
SIPART PS2 Console for NAMUR Mounting Kit with rotary actuators 80 X 30 X 30 MM.
$157.82
Mounting kit for SIPART PS2 for part-turn actuator to VDI/VDE 3845 Valve Assemblies.
$358.16
Manometer manifold for Siemens SIPART PS2 electro pneumatic double active valves positioner.
$309.02
Manometer manifold for Siemens SIPART PS2 electro pneumatic single active valves positioner.
$38.96
Replacement tie rod end to suit 8mm Female feedback arm assembly as used on the SMC 8100 Rotary Positioner.
$38.70
Tie rod end to suit 8mm feedback arm assembly.
$34.68
Replacement tie rod end to suit 5mm feedback arm assembly as used on the SMC 8100 Rotary Positioner.
$93.73
To suit SMC 8000 Leaver Type Pneumatic Positioner with a 50mm to 140mm stroke
$46.74
To suit SMC 8000 Leaver Type Pneumatic Positioner with a 35mm to 100mm stroke.
$15.88
When installing on the rear surface use the SMC 8100 “S” Feedback Arm.
$28.66
When installing on the side surface use the SMC 8100 “M” Feedback Arm.
Unit 3/12 Day Road
Rockingham Western Australia 6168
PO Box 2122 Rockingham
Western Australia 6168
(08) 9500 9120
0428 942 107
sales@instrowest.com.au