Ramsey 60-12 Digital Belt Speed Sensor

Monitor conveyor belt scale speed in demanding bulk material handling applications with the highly reliable and accurate Ramsey™ 60-12 Digital Belt Speed Sensor. Direct-coupling the sensor to the conveyor tail pulley, snubbing roll, or large diameter return roller ensures accurate belt-travel readout.

Models 60-12C, F, G, and ENC Speed Sensors must be attached to a pulley shaft that turns at true conveyor belt speed. Normally, the tail pulley shaft or a snubbing roll shaft satisfies this requirement. In installations where the tail pulley or snubbing roll shaft is not accessible, an additional pulley must be installed specifically for the speed sensor.

• 60-12C is used for speeds from 20 to 200 RPM and supplies the output of the generator directly to the totalizer for high-speed operation
• 60-12F is used for speeds from 3 to 30 RPM
• 60-12G is used for speeds from 10 to 200 RPM
• 60-12ENC is used for speeds 0 to 200 RPM and has a 500 pulse per revolution encoder inside, typically is used on slow RPM applications

Product Specifications:

• Type: Digital, brushless
• Mounting: Direct to 15.88 mm (0.625 in) diameter stub shaft on the tail pulley, bend pulley or return roll
• Housing: Weather-tight, epoxy finish, cast aluminum
• Mounting Hardware: Supplied with coupling, restraint arm, and restraint spring
• Shipping Weight: 3.6 kg (8 lb)
• Robust industrial design for the most demanding applications

Instrowest can help with product supply, installation, calibration, and maintenance.

As each application of this product is different, we custom design a solution for you.
Please email sales@instrowest.com.au and one of our experienced technicians will contact you to discuss a solution.