Login/Signup
Yokogawa EJX210A Flange Mounted DP Transmitter- 5 to 500 kPa Range, 1/2 NPT F Connection, Teflon film
Yokogawa EJX210A Flange Mounted Differential Pressure Transmitter 5 to 500 kPa pressure range, 1/2 NPT F process connection, Teflon film.
Qty Available: 0
The high-performance flange mounted differential pressure transmitter EJX210A can be used to measure levels of densities of solidifying or precipitating liquids. EJX210A outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure.
Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.
The Yokogawa EJX210A is the flange-mount Liquid Level Transmitter in the series.
The Yokogawa EJX210A features include:
- ± 0.075% Accuracy
- ± 0.1% Stability per 1 year
- 120 ms Response Time
- Exida and TUV SIL2 / SIL3 Certified
- LPS (Local Parameter Setting)
- Signal Characterizer for the 4 to 20 mA output
Please see “Technical Specification” for this specific transmitter.
Please feel free to discuss with us about Yokogawa Pressure Transmitter and your product requirement. Instrowest can help you with product Supply, Installation and Calibration. Contact us Now
Output signal: 4 to 20 mA DC with digital communication (HART 5 / HART 7 protocol)
Measurement span (capsule): 5 to 500kPa (20 to 2000 inH2O)
Low pressure side wetted parts material:
Cover flange and process connector: ASTM CF-8M
Capsule: Hastelloy C-276 *2 (Diaphragm) F316L SST, 316L SST (Others)
Capsule gasket: Teflon-coated 316L SST
Vent/Drain plug: 316 SST
Low pressure side Process connections: with 1/2 NPT female process connector
Coverflange bolts and nuts material: 316L SST
Installation: Horizontal piping type and left side high pressure
Amplifier housing: Cast aluminum alloy
Electrical connection: M20 female, two electrical connections without blind plugs
Integral indicator: Digital indicator with the range setting switch (push button)*5
N: Always N
Process connection style: Flush type
Flange rating: ANSI class 150
Flange size: 3-inch (80mm)
Flange material: 316 SST *10
Gasket contact surface*1: Serration (for ANSI flange with wetted parts material SW only)
Wetted parts material (high pressure side) *9:
Diaphragm: 316L SST
Others: 316 SST
Flushing connection ring*2:
Ring: None
Vent/Drain plugs: -
Material: -
Extension: None
Fill fluid: For general use (Silicone oil)
Process temperature *3: –40 to 120°C
Ambient temperature: –40 to 85°C
IECEx Scheme: IECEx Intrinsically safe, type n and Flameproof Approval
Painting: Anti-corrosion coating *2 change
Material certificate: For Flush type
High Pressure side: Process flange, Block *12
Low Pressure side: Cover flange, Process connector
Teflon film *6 *7: Diaphragm protection from sticky process fluid by FEP Teflon film attached with fluorinated oil. Operation range: 20 to 150°C, 0 to 2 MPa (Not applicable for vacuum service).
| 1021110 | 5 Valve Manifold- 5D4 - Direct Mounting |
$464.81
|
|
|
| 1021131 | 5 Valve Manifold - 5D1 - Direct Mounting Manifold |
$401.61
|
|
|
| 1021130 | 3 Valve Manifold- 3D5 - Direct Mounting |
$291.84
|
|
|
| 1021127 | 3 Valve Manifold- 3D1 - Direct Mounting |
$388.30
|
|
|
| 1021103 | SS Exd Blind plug 20mm |
$30.96
|
|
|
| 1021101 | Instrument Configuration |
$142.00
|
|
|
| 1021116 | Type 125 Instrument Sunshade |
$140.46
|
|
|
| 1011121 | Rocol Silicone Lubricant - Grease |
$29.19
|
|
|
| 1021104 | Instrowest Custom SS ID Tag |
$50.00
|
|
