7010642

Druck DPI 615HC/IS Hydraulic Calibrator - 2.5 mbar to 700 bar (DPI615HC/IS)

Overview

The Druck DPI610HC-IS is now Obsolete and replaced with the Druck DPI610E-SHC.

$0.00 Price including GST: $0.00
In stock

Qty Available: 0

If out of Stock, Typical Lead Time: 1 Week

The Druck DPI615HC-IS, a highly accurate, and easy to use intrinsically safe calibrator is only part of the solution for improving overall data quality and working efficiency. The DPI 615, with data storage and RS232 interface, reduce calibration times and eliminate data recording errors. The hydraulic model is designed for pressure ranges from 2.5 mbar to 700 bar (10,000 psi).

The DPI 615 also provides error analysis for field reporting of calibration errors and pass/fail status. In addition, procedures downloaded from a PC automatically configure the DPI 615 to pre-defined calibration and test routines.

The DPI 615 adds powerful time saving and error eliminating features to the comprehensive functionality of the DPI 610. These include field error calculations with PASS/FAIL analysis and two-way PC communications for downloading procedures and uploading results.

General specifications
Pressure Range: from 2.5 mbar to 700 bar (10,000 psi)
Accuracy: 0.025% FS
Integral Pneumatic Pressure Source: 0 to 6000 psi
Measure: Pressure, mA, V, switch state (open/closed), and ambient temperature
Output: Pressure, mA step, mA ramp, mA value
Remote pressure sensors: Up to 10 digitally characterized sensors per calibrator
Approval: ATEX
Documenting (DPI 615 only): Error analysis with pass/fail status and graphs. Two-way PC communication for transferring procedures and results

The DPI 610/615 PC, HC, LP, and I include an integral sensor, the range of which should be specified from the list below.

Pressure Ranges

What's included with this kit?

  • • Pressure calibrator
    • Batteries
    • Carrying case
    • Test leads
    • User guide
    • Calibration certificate

The Druck DPI612 hydraulic pressure calibrator is availbale for Non-hazardous area.
We can offer NATA calibration certification (third party).

Please feel free to discuss with us about your product requirement. Instrowest can help you with product Supply, Installation, and Calibration. Contact us Now

Pressure Range: from 2.5 mbar to 700 bar (10,000 psi)
Accuracy: 0.025% FS
Integral Pneumatic Pressure Source: 0 to 6000 psi
Measure: Pressure, mA, V, switch state (open/closed), and ambient temperature
Output: Pressure, mA step, mA ramp, mA value
Remote pressure sensors: Up to 10 digitally characterized sensors per calibrator
Approval: ATEX
Documenting (DPI 615 only): Error analysis with pass/fail status and graphs. Two-way PC communication for transferring procedures and results

  1.  DPI 610/615 Series Druck Portable Pressure Calibrators Datasheet