Druck DPI610E-SHC-165G/A Hydraulic IS Calibrator 100 bar/1500 psi G or A
The Druck DPI610E-SHC-165G/A-U0-B0-M hydraulic hazardous area pressure calibrator with HART configurator, pressure range 100 bar/1500 psi/10 MPa gauge or Absolute pressure.
Qty Available: 0
The DPI610E handheld pressure calibrator is the latest and the sixth generation of the DPI600 family.
The DPI610E has been designed for instrument technicians, using input from those working in the field, combining pressure generation, signal measurement, and loop power with significantly improved pump capabilities and a powerful touch-and-button user interface.
Model Specific Features
Druck model: DPI610E-SHC-156G/A-U0-B0-M
Pressure range: 100 bar/1500 psi/10 MPa gauge or Absolute pressure
Pump type: Hydraulic hazardous area
Dirt trap: Included
General Series Features
- Improved pump design for ease of use and speed
- Robust design for the toughest environments with a backlit high-contrast display
- Inbuilt barometer for accurate absolute pressures
- Pneumatic ranges from Vacuum up to 35 bar/500 psi/3.5 MPa
- Hydraulic ranges up to 1000 bar/15000 psi/100 MPa
- Select from 28 pressure units, plus a custom user-defined
- Large, easy-to-use user interface with both physical buttons and a touchscreen - enables use with or without gloves
- Hart configurator on all versions
- Retains the capability of the original DPI610 Series but with better accuracy and simplified connections
- Hand-tighten, quick-fit pressure adapters, and hoses - no tools needed up to 1000 bar.
- G1/8 and 1/8” NPT female quick-fit adapters are supplied as standard.
- Advanced documenting capabilities
- The hazardous area (intrinsically safe) version is available
- Compatible with external pressure and temperature probes (PM700E & RTD probe)
- Enhanced battery life of over 24 hours from a 2-hour charge
- On-board quick reference guide
- The electrical calibration certificate supplied
- Pressure calibration certificate supplied in the bar, psi, and kPa
- Optional UKAS-accredited calibration available (accepted as equivalent by NATA)
Each DPI 610E is supplied with a lithium-ion battery, mains charger, integrated carry strap, test leads, G1/8 female and 1/8 NPT female adaptors, calibration certificate, and quick start user guide. All pneumatic versions come with an IDT dirt moisture trap to prevent contamination and all hydraulic versions come with a 100ml reservoir.
For any technical queries, product demos or project offers, please email our sales team ti discuss your requirement. Please email us at sales@instrowest.com.au or Call on 08 9500 9120
Druck DPI610E-SHC-165G/A-U0-B0-M
- Pressure Range: 100 bar/1500 psi/10 MPa gauge or Absolute pressure
- NLHR (24hr): 0.018%
- Gauge -10 to 50 °C: 0.025%
- Sealed Gauge -10 to 50 °C: 0.025%
- Absolute -10 to 50 °C: 0.063%
- Media compatibility: 316L Stainless Steel and Hastelloy C276
- Approvals: CE marked, UKCA marked, Hazardous Area version: ATEX, IECex, UKEX to EN60079-11:2012 Ex ia IIC T4 Ga (-10 to 50 °C)
- Humidity: 0 to 90% RH non-condensing. To Def Stan 66-31, 8.6 cat III
- Shock/vibration: BS EN 61010-1:2010/MIL-PRF-28800F CLASS 2
- Altitude: Up to 2000m
- EMC: BS EN 61326-1:2013
- Electrical safety: BS EN 61010-1:2010
- Pressure safety: Pressure Equipment Directive - Class: Sound Engineering Practice (SEP)
- Display: Size 112mm (4.4in) diagonal. 320 x 240 pixels. LCD monochrome display
- Internal memory: 100,000-point data logging memory, storing user procedures, and test results
- Power Supply: Integral Lithium Ion Battery, Mains adaptor 260V 50/60Hz AC, Output 15V 1.6A DC
- Languages: English (and others)
- Operating temperature: -10° to 50°C (14° to 122°F)
- Storage temperature: -20° to 70°C (-4° to 158°F)
- Ingress protection: IP 54. Protected against dust and splashing water from any direction
- Battery life: 100% Volts Measure, 0% Current Source 4mA, 0% Current Source 20mA - 90 hours (depending on functions).
- Connectivity: USB client micro-USB