Druck DPI 880 Multifunction Calibrator

The DPI 880 Multifunction Calibrator is an ultra compact and simple to use tool for testing, configuring and calibrating virtually all process parameters. It measures, sources and simulates mA, mV, V, RTDs, thermocouples, ohms, frequency, pulses and pressure, captures switch values and provides 24 V loop power.

Temperature
Measures or simulates RTD or thermocouple sensors and is the ideal tool for checking probes, transmitters, process loops, indicators and controllers. Use with a temperature probe to provide a versatile thermometer

Pressure
Intelligent Digital Output Sensor (IDOS) Pressure Modules are available from 10 in H2O to 10,000 psi (25 mbar to 700 bar). IDOS modules are Plug & Play requiring no instrument calibration or set-up to provide a fully featured pressure calibrator.

Frequency
Measures or sources Hz, kHz, CPM and CPH providing a highly accurate calibration standard and versatile test tool for process technicians and electronic engineers. Dedicated features facilitate test and maintenance of electronic circuits, frequency/flow meters, batch counters, tachometers, and motion pickups.

GE Druck DPI 880 Multi-function Electrical Calibrator Specification:

Measure
dc Voltage: 0 to 30V
dc Current: 0 to 55mA
Resistance: 0 to 4000Ω
Frequency: 0 to 50kHz
CPM: 0 to 999999
Thermocouples: J, K, T, L, U, B, R, S, E, N, C, D
RTDs: Pt1000, Pt500, Pt200, Pt100, Pt50, D-100, Ni100, Ni120
*Please check PDF data sheet for full specifications

Source
dc Voltage: 0 to 12V
dc Current: 0 to 24mA
Resistance: 0 to 4000Ω
Frequency: 0 to 50kHz
CPM: 0 to 59999
Thermocouples: J, K, T, L, U, B, R, S, E, N, C, D
RTDs: Pt1000, Pt500, Pt200, Pt100, Pt50, D-100, Ni100, Ni120
*Please check PDF data sheet for full specifications

HART mA loop resistor: 250Ω (menu selection)
Operating temperature: -10°C to +50°C 0 to 90% RH non-condensing
Connections: 4mm sockets and mini-jack thermocouple socket
Display: Graphic LCD with backlight.
Battery/battery life: 3x AA alkaline, >50 hours measure, >10 hours 24V source
*Please check PDF data sheet for full specifications

The DPI 880 Multi-function Calibrator is part of the Druck DPI 8xx series of hand held instruments. This series of instruments uses Intelligent Digital Output Sensor (IDOS) technology to give instant plug and play functionality with a range of Universal Measurement Modules (UMM).

Druck DPI 880 Multi-function calibrator supplied with test leads, 3x AA alkaline batteries and instruction manual.

Please feel free to discuss with us about your product requirement. Instrowest can help you with product Supply, Installation and Calibration. Contact us Now