View Case Study

Instrowest was approached by Jubilee Mines Cosmos Operations to help them find a solution to their chemical dosing problem. The problem involved dosing sodium cyanide to the flotation circuit to aid the rejection of arsenic present in the ore. Cosmos contacted other instrumentation and valve service providers but due to the small dosing rates required, typically 0- 150 ml/min, and the tendency for sodium cyanide to crystallize in changing temperatures, a solution could not be sourced.

The second of two options presented by Instrowest was selected. It involved the use of electrically actuated metering valves with low flow coefficients. Instrowest managed to source these actuators from an overseas manufacturer. The actuators are 24 volts DC driven and controlled by 4-20 mA.

Instrowest designed the ring main around the required flow rates for the ten dosing points. The ring main is designed to run at a constant pressure controlled by the Yokogawa DCS. The valves were then sized according to their desired flow rates and the known pressure of the ring main.

Instrowest presented their ideas in a "Proposal of work". This included a full breakdown of the project, calculations for valve sizing, the type of measuring device 

required, the reasons why the products were chosen and the pros and cons of each of the products. A full budget estimate for Instrowest to supply, install and commission the products chosen was included at the end of the proposal.

The personnel at Cosmos were very pleased with the Instrowest proposal and organised a site visit so the project could be discussed and finalised prior to parts being ordered. It was decided to implement the ring main pressure control and the conditioner tank dosing point as soon as possible.

The installation of the ring main and conditioner tank dosing point went ahead in October 2007 and was proved to successfully control the low rates of cyanide required. In April 2008 an additional two dosing points were added (1st Rougher Cell and Mill Addition).

Results

As a result of this project’s success, Cosmos now has greater control over the cyanide dosing system, leading to better arsenic rejection and efficiency in their cyanide usage. The Cosmos Senior Metallurgist is pleased with the performance of the system.

Based on this project's success and performance of the valves and actuators installed, Instrowest has become the West Australian Distributor for Hanbay Actuators. Instrowest can see there is a strong market for this product and is currently in discussion with a major gold mining company to use them for cyanide addition in a CIP process.

If you would like Instrowest to assist you with any chemical dosing queries or problems please contact Instrowest.
Email: admin@instrowest.com.au 
Website: www.instrowest.com.au

Tags: Instrumentation, Actuator Valve, Actuator, Calibration Services, Instrument Installation